Honda Transalp 700 Screen Adapter Kit installation:

Before starting, prepare a clear flat area to lay out the screen, Adapter Kit and tools, taking extra care not to damage or scratch the screen.

Remove the 4 Plastic fasteners holding the screen in place and place the screen in a safe place.

Make sure the 4 Rubber inserts are still correctly in place, ready to accept the Adpter Kit.

Assemble each Bracket Assembly carefully using the pre-installed fasteners (Type may vary).

 

Do not fully tighten the fasteners until the screen has been fitted.

Loosely attach the screen using the fasteners provided (these are pre-installed so need to be removed first), ensuring that a Rubber washer is fitted between the screen and each of the 4 bracket tabs.

 

Tighten the Brackets onto the cowl then, taking extra care with the screen fasteners - tighten these just enough to prevent any movement, i.e tighten to the point just before the rubber washers start to compress. 

 

TAKE CARE NOT TO OVERTIGHTEN AS THIS MAY CRACK THE BRITTLE SCREEN.

 

 

Take care whilst riding the bike until you have familiarised yourself with the bike's new characteristics.

 

Do not attempt to adjust the screen whilst riding.

 

Regularly check the fasteners for security.