Engine/Frame Guard - Thruxton 1200

Firstly, remove the lower radiator-guard fastener.

Fit the two spring-fasteners onto the lower frame tabs, ensuring the threaded section is aligned with the hole.

Loosely fit the Engine Guard using the new M5 fastener (using a small amount of thread lock) and washer, ensuring the small spacer is sandwiched between the radiator-guard tab and the Engine-Guard, supporting roughly in position from underneath.

Insert the two M6 lower fasteners and washers to mount the Engine-Guard under the frame.

Tighten the Radiator fastener to 5Nm and the underside fasteners to 8Nm.

 

 

Do not use the Engine-Guard as a jacking point.