TIGER 800 ACCESSORIES

Windshield Kit

Large, light-tinted screen shown

This brand new design is totally unique and provides a fully adjustable (tilt and height) windshield system to complement our tried and tested screen designs - Medium and Large sizes available (recommended for this application).

If you have previously purchased one of our complete screen kits for another bike then you will likely be able to reuse the screen and screen-side brackets, offering a big financial benefit and part of our committment to offer you the best possible value for money.


The kit can be fitted in around 30-40 minutes and requires no modification to the bike. 

This is the most solid and robust system you will find for the Tiger 800, providing a total solution for wind noise and turbulence issues.

The kit bolts directly onto the metal sub-frame and doesn't use any of the plastic mounts around the head-light housing nor the pivoting bracket assembly - these are simply too flimsey to provide a robust and rigid setup.

Large, dark tinted screen shown

As usual, the kit will also accomodate an accessory bar and screen baffle, providing a truly unique system to optimise your adventure riding!

For Riders over 1.8m (5' 11") tall we would recommend the Large screen (as shown above) for maximised protection.

Large screen is 500mm high x 400mm wide; Medium is 450mm x 350mm.

Screen above (top) shown with optional 'eye-brow' decals.

Options:
Eye-Brow Options (Pair):

Accessory Bar

This Accessory Bar is designed to fit onto the Windshield Adapter Kit and can easily be retro-fitted at a later date.


It allows you to position your GPS/Phone/Accessory in the ideal position with minimum distraction from your view ahead.

 

Made from 1/2" or 3/4" Diameter Stainless Steel or powder-coated alloy and suitable for tool-less adjusters or standard.

 

Also available in a Black Powder-Coated finish.

 

 


Finish

Screen Baffle

The forward positioning of the screen is intended to help relieve air pressure built up in front of it. This means that some air does flow up between the screen and the cowl. In the colder months, this air may be unwanted so the screen baffle eliminates this and also offers additional protection from rain/snow, etc.

 

The baffle is designed to rotate to any position you require and can also help fine-tune the elimination of turbulence and wind noise - especially useful if carrying luggage and/or passenger.

There can be a slight increase in turbulence behind the screen at higher speeds with the gap totally blanked off.

 

Made from Stainless Steel and available in a brushed-finish or Black Powder-Coated.

 

Select:

Tail Rack

This Tail Rack is ideal for locating a tail-pack or smaller luggage items.

The Rack comes with suitable spacers and hardware to mount directly above the existing Triumph plastic rack.

Provides numerous attachment options and the slots are wide enough for buckle straps to be threaded through for secure fastening.

There is also the option to mount a separate Back Rest / Fuel Canister Holder Assembly if desired, using a unique bracket - see Universal Products section.

Made from 3mm Laser-cut Stainless Steel with a brushed finish - powder-coating also available.

 

Measures approximately 260mm long x 250mm wide overall.


Select:

Luggage Rack

This versatile luggage rack will provide a lot more luggage capacity than the tail rack whilst still providing numerous attachment combination for top boxes, luggage straps, etc. 

Made from 3mm Stainless Steel with the option of Powder-Coating.

Comes with special spacers and stainless steel hardware to mount onto the existing Tiger 800 threaded holes.

Measures 475mm wide x 300mm deep overall.

Compatible with the Triumph Panniers.

There is also the option to mount a separate Back Rest / Fuel Canister Holder Assembly if desired, using a unique bracket - see Universal Products section.

Select:

Seat Rack

This unique rack assembly will siginificantly increase the Tiger's luggage capacity by adding a solid platform above the passenger seat (does not touch the seat).

It can be used in conjunction with the luggage rack (above) or as a separate system and incorpoarets various luggage strap attachment options.

The rack sits just above the grab handles to accomodate wider loads.

It comes with quick-release fasteners to provide easy access to the under-seat storage.

Fully compatible with the Triumph Panniers but can also be fitted without - select 'Spacer Kit' if you don't have Triumph's pannier mount brackets.

Made from 2.5mm Stainless steel and comes with all fastneners and bracketry.

Also available in a black powder-coat finish.

Design Option#1 is for use with our luggage rack (as shown in the picture)

Design Option#2 is for a direct bike mounted design.

Select:

Fuel-Filler Cap Decal

Add that personal touch to your bike with one of these superb quality filler-cap 3-piece decals.

Made from high quality CNC-cut Aluminium, the graphics are etched into the material during the anodising process - this makes them resistant to corossion, chemicals and heat.


Easily applied using a special foil-backed adhesive.


Please do not mistake these for much lesser quality plastic items.

 

 

 

 

  

£21.50

Rear Brake Reservoir Cover

Convert the bland plastic reservoir bottle into asomething a bit more in keeping with the bike's styling.


It can also be black powder-coated for a more discreet look.

 

Made from stainless-steel with new stainless hardware.

 

Fitted in less than a  minute!

 

Shown (left) on Tiger Sport but is the same part.

 

 

 


Select:

Fender Extender

This Mudflap/Fender Extender is ideal for the Tiger XC as it adds up to 120mm of additional protection to significantly reduce the amount of mud and grime hitting the front of the engine.

It also reduces stone damage, limiting corrosion further.

The kit includes Allen Key plus 1/4" dia. Stainless Steel Fasteners and lock nuts.

It is 175 mm high x 120mm wide.

 

An Absolute MUST HAVE to help keep your bike in optimum condition!

Made from Precision Cut, High Quality, Durable, 3mm Polyurethane as used for the best Rally Car Mudflaps.

 

 

 


Select Colour

Rear Splash Guard

This Splash-Guard/Fender-Extender is ideal for the Tiger 800 as it adds up to 100mm to the numberplate for additional protection to significantly reduce the muck and water 'rooster-tail'.

 

The kit includes Allen Key plus 1/4" dia. Stainless Steel Fasteners and lock nuts to attach to the numberplate.

  

An Absolute MUST HAVE to help keep your bike in optimum condition!

 

Made from Precision Cut, High Quality, Durable, 3mm Polyurethane as used for the best Rally Car Mudflaps.

 

 

 

£10