DUCATI  MS1200 (2015) - ACCESSORIES

Please note that our other range of accessories for the 2010MY Multistrada are also valid for this newer version.

Screen Adapter Kit (2015)

One of the most common faults aimed at the Multistrada is its' lack of decent wind and weather protection.

The standard screen is angled to direct wind blast directly at the head and the Ducati touring screen is only marginally better.

We have addressed these issues by designing a unique bolt-on sub-carrier that allows a greater range of adjustment for the screen - with tool-less adjustment.

It repositions the screen 20mm further forward to relieve pressure in front of the screen and reducing vacuum behind it - the main cause of turbulence. This allows the air to flow better over and around the screen. This forward positioning also provides essential airflow to prevent visor misting and fogging.

The added tilting ability allows you to fine tune its performance to suit your varying needs - pillion and luggage configurations, road types, weather, etc...... .

A truly essential modification and a more cost effective solution than much larger screens that only partially resolve the problems.

 

 

For optimum wind noise, wind blast, turbulence, weather protection improvements and taller riders (6' plus), the kit will also accomodate one of our tried-and-tested and extremely successful Screens - clear or tinted. 

SEE DETAILS BELOW.

Overall Screen size is 480mm Tall x 420mm wide.

Has much greater coverage than standard, has an optimised profile with smaller cut-outs for the Handguards (due to its' forward positioning).

The Adapter Kit has a Black Powder-Coated finish with Plastic adjuster knobs and Stainless Steel hardware.

 

The pre-assembled kit can be fitted in minutes and requires no modification to the bike.

 

  £85.00

Screen Upgrade

or optimum wind noise, wind blast, turbulence, weather protection improvements and taller riders (6' plus), the kit will also accomodate one of our tried-and-tested and extremely successful Screens - clear or tinted.

Overall Screen size is 480mm Tall x 420mm wide.

Has much greater coverage than standard, has an optimised profile with smaller cut-outs for the Handguards (due to its' forward positioning).

The Adapter Kit has a Black Powder-Coated finish with Plastic adjuster knobs and Stainless Steel hardware.

The kit can be fitted in minutes and requires no modification to the bike.

 

It is exactly the same screen as the 2010MY but with 4 holes to suit the later bike.

 

Please note that Screens need to be ordered in addition to the Adapter Kit.

Select Finish:

Accessory Bar

This Accessory Bar is designed to fit onto the Windshield Adapter Kit and can easily be retro-fitted at a later date.

It allows you to position your GPS/Phone/Accessory in the ideal position with minimum distraction from your view ahead.

 

Made from 1/2" or 3/4" Diameter Stainless Steel and suitable for tool-less adjusters or standard.

Also available with Black Powder-Coating.

Finish