BENELLI TRE-K ACCESSORIES

Windshield Kit

We are pleased to announce that we have now finished development on our new Tre-K Adjustable Screen Kit.

The Benelli is a superb all-round machine but is seriously lacking rider protection for long distance and varied weather conditions.

This is the first ever screen kit to be offered for this bike and will convert it into a true Adventure ride.

The design replaces the Benelli's flimsey screen assembly to provide a fully adjustable (tilt and height) windshield system to complement our tried and tested screen designs - Medium and Large sizes recommended for this application.

The kit consists of a aluminium cowl that mounts onto the fairing (replacing the standard screen), onto which the adjustable bracketry is attached.

Shown with Medium Dark Tinted Screen (available separately) - this is suitable for riders up to 6' tall; Large screen recommended for riders 6'+

The cowl is black powder-coated and available as a separate item (or simply remove the bracketry) if you prefer the naked look.

Screen sold separately (may be possible to use one of your own if suitable) - Select a screen HERE

The kit can be fitted in around 1 hour and requires no modification to the bike. 

This solid and robust system will provide a total solution for wind noise and turbulence issues, being totally adaptable to your needs.

Options:

Screen Baffle

The forward positioning of the screen is intended to help relieve air pressure built-up in front of it. This means that some air does flow up between the screen and the cowl. In the colder months, this air may be unwanted so the screen baffle eliminates this and also offers additional protection from rain/snow, etc.

The baffle is designed to rotate to any position you require and can also help fine-tune the elimination of turbulence and wind noise.

There is a slight increase in turbulence behind the screen at higher speeds with the gap totally blanked off.

Made from Stainless Steel and available in either brushed-finish or Black Powder-Coated.

Select

Exhaust Header Guard

The front of the Tre-K engine is very exposed, especially to debris coming off the front wheel, causing the paint to chip, etc.

 

This exhaust/engine guard is designed to significantly reduce damage to the down pipes, engine paint finish and oil filter assembly.

Made from Stainless Steel, it attaches to the exhaust manifold in 4 places using two stainless steel braces behind.

 

An Absolute MUST HAVE to help keep your bike in optimum condition.

Needs no modification to the bike and fitted in munutes for instant peace of mind.

 

 

  £85.00

Auxillary Light Kit

This innovative, extremely cost-effective kit will now give riders the opportunity to fit a wide and varied selection of auxillary lighting, from Projector-style to larger Driving or Fog Lamps.

 

Being able to mount your lights on the forks also gives the ability to aim your lights in any direction whilst stationary - a major bonus when riding off-road or picking your way through difficult terrain.

 

Made from Stainless Steel, this robust set-up requires no modifications to the bike and does not interfere with any components or operation.

Also has rubber-lined mounts to protect the forks' finish.

Has 3 hole positions each side to adjust the width of the lights and includes plastic spacers for using M6 bolts ilo M8.

 

Compact 60mm 55W Spot Lights and electrical kit are an optional extras.

An absolute must-have upgrade for improved rider safety and can be used as day-time running lights in a slightly dipped position.

Light shrouds are also available in standard brushed finish or black powder-coated.

 

Options:

Rear Caliper Guard

The rear caliper on the Tre-K is mounted in an extremely vulnerable position and exposed to stones, mud, grit, etc.

This unique Caliper Guard gives much needed extra protection and also limits the amount of mud/grit getting into the caliper and pads, reducing damage to the disc.

Benelli rectified this issue on the Amazonas by reloating the caliper but fitting this part is far easier and much more cost effective for the Tre-K.

Made from 2mm Stainless Steel and comes with new Stainless Steel hardware.

It is a bolt-on item and fitted in minutes.

Black Powder-Coat or standard brushed finish available.

 

Threadlock required for this product.

Select:

Side Stand Foot Extension

This HEAVY DUTY Side Stand Foot Extension is an Adventure Bike compulsary item!

It significantly increases the foot surface area to provide a much more secure footing for your bike especially on softer or infirm ground - does not interfere with the bike's operation.  

 

The Shield Shape measures approximately 105 x 105mm overall.

 No modification to the bike is required and fitted in minutes.

This robust design is made from Stainless-Steel top & bottom plates, plus Stainless Fasteners and comes with Alloy Centre-Spacer and Allen Key.

 

Available in Brushed finish (as shown) or Black Powder Coating.

 

Options

Fender Extender

This Mudflap/Fender Extender is ideal for the Tre-K as it adds up to 120mm of additional protection to significantly reduce the amount of mud and grime hitting the front of the engine and radiator.

It also reduces stone damage, limiting corrosion further.

 

The kit includes Allen Key plus 1/4" dia. Stainless Steel Fasteners and lock nuts.

It is 175 mm high x 120mm wide.

 

An Absolute MUST HAVE to help keep your bike in optimum condition!

Made from Precision Cut, High Quality, Durable, 3mm Polyurethane as used for the best Rally Car Mudflaps.

 

If you prefer a shorter version and/or want it to follow the profile of the tyre, see our Fender Extender in the UNIVERSAL products section.

 

  £10