APRILIA CAPONORD ACCESSORIES
Windshield Adapter Kit
This Screen Adapter Kit is designed to address the common issues of wind, noise and turbulence to significantly improve the bikes cruising and touring ability, providing the rider with a much improved riding experience.
The Aprilia Screen is quite a good design (although positioned incorrectly) so we recommend this in conjunction with the Adapter Kit
The key to optimum performance is the forward position of the screen, just enough to allow air to pass underneath, relieving the vacuum created behind the screen - the main cause of turbulence.
This forward positioning also provides essential airflow to prevent visor misting and fogging.
The standard screen will sit approximately 50mm higher and the range of adjustment is 60mm of extra travel with up to 15 degrees of tilt.
The fitment of this kit requires NO MODIFICATION to the bike and fitted in minutes.
These unique and original Kits have become extremely popular amongst the Adventure Rider community all around the world!!
The Benefits of this system also include:
* Kit comes Preassembled, ready to mount to the bike using existing locations.
* 12 indexed positions (height and tilt angles) - giving all the range of adjustment you'll need.
* Top grade Laser-Cut Stainless Steel brackets and Stainless Steel fasteners.
* Kit comes complete with all hardware and tools, plus spare sundries.
* Allows cleaning access behind the screen without removal.
* Can be fitted in approximately 15-20 minutes.
* On-line step-by-step detailed digital photo instructions.
* Tool-less upgrade available for quicker screen adjustments.
PLEASE NOTE that you can also customise your kit to accomodate one of our own Screens - available in the UNIVERSAL section.
If you already have the kit and want to fit our screen to it, you will need to purchase the 'Retro-Fit' brackets (these come as a pair).
If you purchase a kit with one of our screens, you will not need to purchase these seperately.
This Accessory Bar is designed to fit onto the Windshield Adapter Kit and can easily be retro-fitted at a later date.
It allows you to position your GPS/Phone/Accessory in the ideal position with minimum distraction from your view ahead.
It also provides excellent weather protection for your accessories in this position.
Available in 1/2" or 3/4" Diameter, in Stainless Steel or Black powder-coated alloy - suitable for tool-less adjusters or standard fasteners.
You can also add adjustable End-Plates which porived additional sliding and tilt adjustment for the accessory bar (as shown below, attached to the ends of the Accessory Bar System blades).
The forward positioning of the screen is intended to help relieve air pressure built-up in front of it. This means that some air does flow up between the screen and the cowl. In the colder months, this air may be unwanted so the screen baffle eliminates this and also offers additional protection from rain/snow, etc.
The baffle is designed to rotate to any position you require and can also help fine-tune the elimination of turbulence and wind noise.
There can be a slight increase in turbulence behind the screen at higher speeds with the gap totally blanked off.
Made from Stainless Steel and available in either brushed-finish or Black Powder-Coated.
Accessory Bar System
This accessory bar system is designed to fit underneath the standard screen using the existing four fasteners and allows fitment of a Sat Nav or phone mount above the dash.
The kit consists of two blade assemblies that provide adjustable end-plates for mounting the accessory bar - available in 1/2" or 3/4" diameter and made from polished stainless-steel or powder-coated alloy.
The parts are made from stainless-steel with an optional black powder-coating.
Our versatile Luggage Rack has now been been specially adapted to fit the Caponord and will mount directly onto the bike using the standard hole positions with spacers provided.
Will allow numerous combinations of luggage retention and strap types.
It has various hole patterns to help mount a Top Box base plate or hardware.
Made from Stainless Steel, with the option of Powder-Coating, and comes with stainless steel hardware and special spacers.
Measures 475mm wide x 300mm deep overall.
This Tail Rack is ideal for locating a tail-pack or smaller luggage items.
The Rack comes with suitable spacers and stainless steel hardware to mount directly above the existing Caponord tail section.
Provides numerous attachment options and the slots are wide enough for buckle straps to be threaded through for secure fastening.
Made from 3mm Laser-cut Stainless Steel with a brushed finish - powder-coating also available.
Measures approx.260mmlong x 250mm wide overall.
Front Fender Extender
This Mudflap/Fender Extender is ideal for the Caponord as it adds up to 120mm of additional protection to significantly reduce the amount of mud and grime hitting the front of the engine.
It also reduces stone damage, limiting corrosion further.
The kit includes Allen Key plus 1/4" dia. Stainless Steel Fasteners and lock nuts.
It is 175 mm high x 120mm wide.
An Absolute MUST HAVE to help keep your bike in optimum condition!
Made from precision-cut, high-quality, durable 3mm polyurethane,as used on the best Rally car mudflaps.